Portable Hg concentration in the air measuring instrument Model 431
대기중 수은 농도 측정기
ultraprecision (0.013ug/m3) measuring instrument Model J 405
- Mercury Surveys and Soil Screening
- Spill Response
- Ensure Worker Safety
- Research Projects for Stack, Flue and Natural Gas
|
- Hazardous Waste Sites
- Mercury Exclusion Tests
- Monitor Disposal and Recycling of Fluorescent Lamps
- Exhaust Duct Analysis
|
|
Specificatio
|
|
Resolution
|
0.001 mg/m3 (405 0.013ug/m3)
|
|
Detection Range
|
0.003-0.999 mg/m3 (405 999 ug/m3)
|
|
Precision
|
5% Relative Standard Deviation at 0.100 mg/m3
|
|
Accuracy
|
± 5% at 0.100 mg/m3
|
|
Response Time
|
13 s in Sample Mode; 4 s in Survey Mode
|
|
Flow Rate
|
750 cc/min
|
|
Power Requirements
|
100-120 V ~ 50/60 Hz, 1 A or 220-240 V ~ 50/60 Hz, 1 A
|
|
Internal Battery Pack
|
Rechargeable nickel-cadmium
|
|
Environmental Range
|
0-40 °C, noncondensing, nonexplosive
|
|
Interfaces
|
RS-232 PC using JCI software
|
|
Dimensions
|
6" W x 13" L x 4" H
|
|
Weight
|
7 lb
|
|
Warranty
|
One year, factory parts and labor
|
|
Certifications
|
European Communities (CE) for 220-240 V~ model only
|
재료내 수분 함량 분석 장치 Model Computrac 1000XL 2000XL 4000 XL
2009부터 새로히 출시된 4000 XL수분측정 기는 1000과 2000의 기능을 보강한 제품입니다
- 아래 비교표 참조
Water content measurement, solids content measurement , ash content measurement Model Max 5000
| MAX 5000 Specificatio |
| Sample Size |
200 mg to 100 g |
| Resolution |
Moisture: 0.0001%; Balance: 0.0001g |
| Moisture/Solids Range |
0.1% to 99.9% |
| Dry Weight Range |
0-300% |
| Results Display |
% Moisture, % Solids, % Ash or % Dry Weight |
| Ending Criteria |
Predict (Auto or Manual), Rate, Time, Rate of Time or Reliability |
| Heating Range |
25 - 600°C, Set in 1°C increments and maintained to ±1°C within the range of 50 - 300°C; ±2°C within the range of 300 - 600°C |
| Test Parameter Memory |
250 Programs |
| Program Identification |
Alphanumeric; programmable prompts for lot or product ID numbers |
| Test Result Memory |
Data from last 1,000 tests and graphs from last 100 tests |
| Statistical Calculation |
Mean, Standard Deviation, and Relative Standard Deviation |
| Power Requirements |
100-120V ~ 50/60 Hz, 1 amp (standby) or 8 amps (heat on) |
| Interfaces |
RS-232 (9-pin standard); parallel printer (LPT - PC standard);
RJ-45 (Ethernet) |
| Dimensions |
470mm L x 323mm W x 24mm H; 18.5" L x 12".5 W x 10" H |
| Weight |
13.6 kg; 30 lbs |
| Warranty |
Two years, factory parts and labor (one year international) |
| Certifications |
cULus; CE |
| Accessories |
Multi-Point Temperature Calibration Module; Printer; Sample Basket; Validation Package; Step Down Power Transformer
|
2010 New Version -Jerome® J605 Hydrogen Sulfide Analyzer - ppb & ppt level H2S Gas Analyser
휴대형 H2S
최저농도 20 ppt (0.02 ppb)정밀도로 분석
대기중 악취 분석 농업분양 농업 기상 토양오염 분야
- Leak Detection
- Quality Control
- Ambient Air Analysis
- Accuracy Check for other Hydrogen Sulfide Monitors and Control Systems
- Applied Research
- Scrubber Efficiency Testing
- Hydrogen Sulfide Source Detection
- Control Room Corrosion Monitoring
- Landfills
- Agricultural Applications
- Regulatory Compliance and Permitting
- Rugged and easy to operate
- Battery powered sensor regeneration (requires external battery pack)
- Auto date/time stamp
- On board data logging 20,000 samples
- Inherently stable gold film sensor
- Pressure sensitive membrane switch operation
- Rechargeable internal battery pack for portability
- Wide detection range allows for multiple applications
- Automatic LCD backlight during low light conditions
- Survey mode for rapid source detection of hydrogen sulfide concentrations
- Microprocessor ensures a linear response throughout the entire range of the sensor
- 4-20 mA output for SCADA systems
- No PC Software Required
- 20,000 Data Points
- Stores Date, Time and Locations
- On-Board Data Logging
- Optional USB interface for data transfer and printing capabilities
- 18 Hour Battery Life
- Detects H2S levels as low as 3 ppb
- Fulfills EPA requirements
| Resolution |
20 ppt in Range 0 |
| Detection Range |
3 ppb -10 ppm |
| Accuracy/Precision |
Range 0: ±1 ppb at 5 ppb/10%RSD
Range 0: ±3 ppb at 50 ppb/5%RSD
Range 1: ±0.03 ppm at 0.5 ppm /5%RSD
Range 2: ±0.3 ppm at 5.0 ppm/5%RSD |
| Response Time |
| Manual Range Selection |
|
| Range 2 (1.0 to 10.0 ppm) |
12 seconds |
| Range 1 (0.10 to 1.0 ppm) |
18 seconds |
| Range 0 (3 to 100 ppb) |
12 to 27 seconds |
| Auto Range Mode |
12 to 52 seconds |
|
| Flow Rate |
150 ml/min or 0.15 l/min |
| Power Requirements |
12V DC/power adapter |
| Internal Battery Pack |
Rechargeable nickel metal hydride (NiMH) |
| Environmental Range |
0-40°C, noncondensing, nonexplosive |
| Interface |
USB |
| Dimensions |
11" W x 6" L x 6.5" H/ 28 cm L x 16 cm W x 17 cm H |
| Weight |
5.4 lbs / 2.5 kg |
| Warranty |
1 year, factory parts and labor |
| Certifications |
European Communities (CE) and TUV: UL 61010-1:2004 standard and CSA-C22.2 NO. 61010-1-04 |
Functional Test Module for instrument verification in the field
- Maintenance Kit for routine maintenance and upkeep
- Hard or Soft Field Carrying Cases for versatile handling and additional storage
- Car Adapter, External Battery Pack
무단수집및 복재를 금합니다 .
상품정보고시
| 제품명 |
수은 수분 H2S 측정기 |
| 판매가격 |
가격문의 |
