Category
|
Description
|
Fiber alignment
|
Fixed V-Groove(Clad to Clad)
|
Applicable type of fibers
|
0.25mm, 0.9mm, 2.0mm, 3.0mm, 4.0mm Indoor cable
|
Fiber count
|
Single fiber
|
Applicable fiber dimensions
|
Cladding diameter: 125§, Coating diameter: 250, 900§
|
Fiber setting and cleaved length
|
7.0mm
|
Splicing modes
|
Splice mode: 100, Heater mode: 50
|
Typical Splice Loss
|
SM: 0.03dB, MM: 0.02dB, DS: 0.06dB, NZDS: 0.06dB
|
Return loss
|
> 60dB
|
Splicing time
|
Typical 7sec (Standard SM, SM-SM mode)
|
Splice loss estimate
|
Available
|
Sleeve heating time
|
30sec(0.9mm fiber), 70sec(indoor, 3.0mm cable), 80sec(Connector)
|
Applicable protection sleeve
|
40mm, 60mm, 32mm or 28mm Connector
|
Storage of splice result
|
The last 2,000 results to be stored in the internal memory.
|
Tension test
|
1.96N
|
Operating condition
|
Altitude: 0~5,000m above sea level, Temperature: -10¡É~50¡É, Humidity: 0~95%,
Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
|
Storage condition
|
Temperature: -40¡É~80¡É, Humidity: 0~95%
|
Dimension
|
136(W)£ø203(L)£ø86(H)mm
|
Weight
|
1.35kg(Including battery 1.65kg)
|
Viewing method and display
|
Two CMOS cameras and 3.5-inch color LCD monitor
|
Fiber view and magnification
|
X/Y : 170X/190X
|
Power supply
|
DC Lithium polymer battery(DC 14.8V, 1650mAh£ø2), 100 ~ 240V AC Adapter
|
No. of splice cycles with battery
|
Typical 120 cycles
|
Electrode life
|
More than 2,500 times
|
Terminals
|
USB
|